Knowledge & FAQ

Commercial kitchen equipment buying FAQ

A commercial kitchen equipment FAQ is a set of short, direct answers to the specification, compliance, pricing, lead-time, shipping, warranty and payment questions that distributors, hotel groups and central-kitchen operators ask before they place an order. Short, direct answers to the questions B2B buyers ask before an order. Each answer gives the conclusion first, then one or two sentences of detail. Where a figure depends on your project, we say so rather than publish an unverified number.

Product & Specs

What information do you need to quote a model?

Send the model list, destination country, quantity, target port and delivery window, plus voltage, gas type and certification needs. The range is configured for 220–240 V or 380 V at 50–60 Hz, single or three phase; state your supply so we quote the correct build. We also need your preferred Incoterm and packing requirement.

Are the technical parameters on the site verified?

Category tables show typical configuration ranges, not verified model data. The general specification supplied for this range covers 220–240 V or 380 V, 50–60 Hz, single or three phase, LPG or natural gas, R290 refrigerant and 201 stainless steel. Model-specific dimensions, power and weight are issued in the official spec sheet on request; never size utilities from an illustrative value.

Can you help if I am not sure which model I need?

Yes. Send your menu, covers per service or kitchen layout. Our engineers propose a configuration, flag ventilation, drainage and electrical constraints, and return a matched equipment schedule with the quotation.

Certifications & Compliance

Which certification do I need for my market?

It depends on the destination and the equipment. EU/UK projects commonly reference CE and UKCA; North American projects reference ETL, UL, CSA and NSF; ISO 9001 and ISO 14001 apply at company level. These are scheme references, not a claim that our products hold them. Tell us the country and equipment list and we will confirm the documents to request.

Do you publish certificate numbers?

Only after verification. Certificate numbers, issuing bodies, scope and validity are marked "Available on request" on this site, including the CE Declaration of Conformity, until official copies are supplied. Request the copy for your exact model and market, because certificate scope is often model-specific.

Will the same model work in every country?

No. Voltage, frequency, gas type, refrigerant and documentation differ by market. The range is configured for 220–240 V or 380 V at 50–60 Hz, single or three phase, with LPG or natural gas and R290 refrigeration where applicable. State your country in the inquiry and we confirm the build and documents before quoting.

OEM & Customization

Do you support OEM and ODM projects?

Yes. PROKTCH provides OEM customisation and one-stop procurement for professional kitchens. Branding, packaging, control-panel language, voltage, gas configuration and dimensions can be reviewed on selected lines. The minimum order for custom work is 50 units per model; confirmed scope, tooling requirements and samples are quoted after a technical review.

Can you build stainless steel fabrication to my layout?

Yes. Send a dimensioned layout with run lengths, sink positions and heights. We return a fabrication drawing for approval covering the stated 201 stainless steel grade, sheet thickness, edge detail and fixing points before production starts. Final dimensions and material grade are confirmed per model in the order file.

Is there a minimum order for custom work?

Yes. The minimum order for custom and private-label work is 50 units per model. Sample development takes 30 days. Tooling, packaging and documentation scope are quoted after the technical review, so confirm your target quantity before releasing the order.

Pricing & MOQ

How is pricing calculated?

Quotations are issued in USD and priced from the model, market build, quantity, documentation and packing scope. Each quotation is valid for 10 days. Send an equipment list and destination port and we return a formal quotation with the scope of supply clearly stated, including exclusions.

What is the MOQ?

The minimum order quantity is 1 unit per model, so you can trial a single unit before scaling. Mixed models in one container are accepted. Tell us the models and quantities and we will confirm container-efficient alternatives and the price in the quotation.

Can I mix models in one container?

Yes. Mixed models in one container are accepted, and distributors often use this option. We prepare a model and documentation matrix per destination before production so mixed-market shipments clear smoothly and the paperwork matches the physical load. Packing is in plywood crates with foam protection.

Lead Time & Shipping

What is the lead time?

Standard lead time is 15 days from drawing confirmation and deposit receipt; sample development takes 30 days. The schedule depends on configuration and quantity, so we state the production window and shipping plan in the quotation rather than an unverified date.

Which Incoterms and ports do you work with?

We quote under EXW, FOB, CIF or DDP from Shenzhen or Guangzhou. State your preferred Incoterm and target port in the inquiry; we then confirm the scope, documentation and container loading plan so the delivery window matches your site readiness.

How is equipment packed for export?

Equipment is packed in plywood crates with foam protection. Stainless surfaces, glass and refrigeration components are protected for sea freight, and the packing scope is stated in each quotation. Tell us your discharge port and handling constraints so we confirm the crate size before production.

Warranty & Spare Parts

What warranty do you provide?

The warranty period is 12 months. The written term, exclusions and claim process are confirmed in the quotation and order documents before release. Ask for the claim procedure alongside your spec sheet so your team knows exactly what to document if a fault appears.

Are spare parts available?

Yes. Common spare parts are supplied with each order, and availability is confirmed per model. We propose a wear-part and consumables kit with the initial shipment — gaskets, burners, jets, thermocouples, shelves and filters as relevant — to prevent downtime in the first service interval.

How are warranty claims handled overseas?

We respond to after-sales requests within 24 hours. Agree the claim process before shipping: we specify the parts list, the documentation needed and the response route in the order file, so a claim raised from a distant site does not stop the kitchen.

Payment & Terms

What payment terms do you offer?

Payment is by T/T, with 50% prepaid and the balance before shipment. Terms are stated in the quotation and proforma invoice, so both sides know the exact commitment before a production slot is opened. Ask us to confirm the bank details in writing.

Do you require a deposit?

Yes. A 50% deposit is prepaid by T/T, with the balance due before shipment. The structure is stated in the quotation and proforma invoice rather than assumed from a generic policy, so your cash-flow planning matches the production schedule.

Is my inquiry data kept private?

Yes. Inquiry data is used only to respond to your request and manage the commercial relationship. See the Privacy Policy for collection, retention, third-party form processing and your data subject rights.

Short selection guides

Three comparisons that most often change a kitchen equipment specification.

Combi oven vs convection oven

A combi oven adds steam to dry heat, so it can steam, poach and regenerate food without drying it out. A convection oven circulates dry hot air only. Choose combi for mixed menus and batch regeneration; choose convection for dry roasting and baking.

CE vs ETL vs NSF

CE is the EU conformity marking and UKCA applies in Great Britain. ETL and UL are North American electrical safety marks; NSF addresses food-equipment hygiene and sanitation. They answer different questions and are often all required on one project.

Gas vs induction

Gas suits high-heat wok and open-flame work. Induction gives fast heat-up, precise control and a lower kitchen heat load, but needs adequate electrical capacity. Choose from your menu, available utilities and extraction design.

Ask directly

Need an answer for your specific project?

Tell us the market, the models and the constraint you are working against. We reply in writing.